31 May 2020

Oathmark: Orc Linebreakers and Spellcaster

So my plan for Oathmark is to make a complete orc and goblin army. To not sink to much money into the army, I'm planning to use a lot of second hand miniatures and conversions. 

Recently found a single box of stuff in the garage that wasn't organised into my system. This was a surprise. All my other miniatures are sorted in settings, sprues, projects etc. Super clean system. The box had a bunch of old Games Workshop stormvermin and a plastic giant. 

Originally the plan was to turn these stormvermin into hobgoblins. But thaose days are long past. Now I'm into Oathmark, building a rank and file army - something I had not thought I would ever do again. 

Orc Spellcaster
I got this Mantic Games orc godspeaker from Ebay. He was meant as a support for a KoW: Vanguard orc warband (using the Dungeon Saga miniatures). Now he's a spellcaster in my force of greenskins. I really dig this model, it's a great design. Not bugged down by too many trinkets. He looks like a wizard - and that's nice. Not going for that GW shaman vibe.

The model comes with a severed head bit and a helmet head. But I chose the less bloody option. Gonna use the head and helmet head for a conversion somewhere else. 



Orc Linebreakers
Linebreakers are cool! I used some of those old storm vermin I found on a sprue. With clever use of glue the Oathmark goblin heads fit right onto the models. The it was just a manner of cutting of those rat tails. 

For painting I've made sure to paint the orc as if they're wearing boots (thought the models are bare footed). I think of this regiment as elite troopers in the army. So to show that I've made all their cloth red (been using two different nuances). My other regiment have browns and greys mixed in - to show their lower rank. 

For the skin color I've been using 6 different nuances of green, just a small way to add variety. The halberd shafts also have three different colors used on them. 

Every model have white warpaint and the banner has the Eye of the Overlord and some mountains.



Here's some photos better showing the various models in the unit. 






The Army
Here's the army so far. 


28 May 2020

Hardwired: Seraph Protocol

For my first game of Hardwired I decided to just go for the introduction scenario in the main rulebook. 

Mission
A transport ship have been shot down and scientist need to be extracted from the zone. The scientist is protected by two security troops and has a killswitch implanted. Get to the VIP, disable the switch, exfiltrate the VIP from site. 

Setup
I setup a bunch of different stuff from my terrain collection to build an industrial zone. Besides a few MDF shipping containers most of the stuff is scratch build or upgraded toys. Made sure there would be plenty of cover for myself and the enemy troops. 

Most of the stuff will be covered in either the modern or industrial terrain pages. 




The Team
Strike Team Alfa is made up with four models from Human Interface. I just picked some cool ones. If one dies during the mission, he'll be retired as a model for now - it's a great excuse to paint up another model for the game. 

From left to right it's Spotless (medic), Brick (heavy shooter), Gator (shotgun), Conduit (hacker). 


The VIP is a nasty piece of work, doing highly illegal body modifications. He's been taken captive by hostile security. My agents are hired from a corporation that need a man with these shady skills, so he has to get out alive. He's protected by d6 rent-a-cops.


For games like this, I like to roll for random deployment edge. My team was coming into the area from the container yard, lots of very heavy cover to stay hidden behind, while moving towards the objective. 


To make good speed every action is poured in to moving towards the objective. Get to the VIP and disable the implant, before there's too many h-sec troops to avoid. The splicer Conduit is fast and run ahead.


Led by Conduit, two other agents Spotless and Gator advance on the flier as well The two security troopers who survived the crash are quickly dealt with and Conduit is able to disable the kill switch on the VIP. 

The first couple of turn are over and h-sec start pouring into the combat zone. The first d6 troopers is not much of a challenge, with all the cover around and only one actino - it'll take them time to get into a firing position.


Rolling for random entry points can be good and bad for my crew. For the first two turns, I'm lucky that the h-sec is deployed on the flanks and not on the route I've chosen for the extraction. Twice the enemies arrive on the wrong side of the downed flier - which is hiding three of my troopers. 


While the team is moving on to the flier, the brute of the group - Brick, is staying behind. He's armed with a heavy weapon, firing a small template. It also makes him slower than the rest of the team, setting him back 1" for every movement action. His job is to provide covering fire for the rest of the team. 


Objective clear and the VIP is ready for extraction. Sawbones Spotless will is better at moving fast, and he'll be moving with the objective towards the clearest board edge. Gator and Conduit will stay back and start taking out the h-sec troopers entering the area - and there's starting to be a lot. 


With his shotgun, Gator moves down toward three d6 h-sec troopers. The fence and truck have forced the troops into a tight formation. Always try to play your AI enemies smart, and with these guys entry point this was the best way forward. With only one action, they wouldn't offer any thread, if not takign a chance. 

Gator takes out a few with his shotgun. 

There's relatively bad cover on the way to the extraction. A few h-sec have entered the area behind the silos. So the scientist and Spotless are forced to hug the bad cover of a bus stop and chain link fence. 


After having blasted away with the shotgun, only one h-sec trooper is left on the right flank. This security is left without any actions, as Conduit blasted off a flashbang earlier - and Conduit can then pick him off with a shot from his SMG. 


Now the more dangerous enemy troopers start entering the board d8 h-sec with two action points. Definitely bringing up the danger in the area. Swarming towards the downed flier, it'll only take them a few turns to get around it.


A tier 2 enemy trooper near the bus stop, super close range to Spotless, who's lucky to not get badly wounded from his fire. 


Spotless is quick to return fire and brings down the enemy trooper standing in the way of exfiltration. The VIP is able to exit the table - and the game is technically won. But for the added action I want all my guys to make it out. 

If some of them should die, it'll be a good reason to paint up even more guys. 


As Brick has not had any good clear shots for a few rounds, he's started to make his way towards the extraction point, slow going for the heavily armed agent. As it's clear the enemies are starting to look like a swarm, that'll be a lot of shots to shrug off in no time.


Hardwired is a quick and deadly game, as this is only the end of turn 4 and a huge amount of d8 h-sec enter the board. And this time the enemies enter right in front of my team, who's trying to extract. The mission just turned very deadly. 

And this is where the mechanics of Hardwired really come into play. My agents will not be able to get out with their free move action - so they need to roll a success for another move action. But Brick will not be able to get out this turn no matter what. 

So what to choose? Use an action to get off a shot? Or be certain to get out and not shot to pieces. 

Sawbones who's good a support rolls a good buff on Brick and drops an EMP that take out a robot. Conduit the splicer is able to hack and take over another robot. Then then move out of the area. Gator has a lot longer to move and use his actions to get out. 


And it comes right down to the wire. In the end Brick is only just making it out alive. He failed a couple of the rolls for movement. Had he failed just one more roll, he would have been blown to pieces. But in the end he makes it out, wounded - but alive. A huge succes. 5 rounds of combat the mission took. 


Aftermath
I really like how the system in Hardwired works. The dice mechanics are easy to remember and there's a real sense of impending loss. If you're not in a good position you will loose to the d10 troopers. Glad I made it out in time. 

I'm looking forward to playing more Hardwired and starting using the rules for sentry guns and surveillance towers.

25 May 2020

Corp Sec Tier 1 and 2

I've started playing the solo/coop cyberpunk game Hardwired (written by Patrick Todoroff who's done Zona Alfa). The games have increasing swarms of hostile forces entering the battlefield in three different tiers.

Tier 1
For the first tier enemies I've painted up some of my Star Saga security forces. These guys are perfect for the easiest enemies, no power armor or similar. I've chosen these colors as they fit my Enforcer ship and some of my other vehicles. They'll work as both cops and security forces.



The next two tier 1 enemies are a couple of agents from Human Interface. Great little models. They don't have any shoulder pads, so to get the white detail I added a few chevrons here and there.




Tier 2
For the second wave of h-sec, I've taken some better geared guys. First is a couple of Warlord Games robots, that I've given some weapons swaps. Armed with GW Tau gatling guns and imperial guard grenade launchers. And then there's two droids from Human Interface.




To complete the tier 2 response team I use some Star Saga marines.


And here's the complete police / security force with non-rapid insertion tuk-tuk.


21 May 2020

Hardwired: First four agents

Hardwired is a small solo/coop skirmish game, written my Patrick Todoroff who's also written Zona Alfa. In the game you control a small group of elite corporate agents. So I picked out four cool models from Human Interface, painted them up an decided to find some fitting stats afterwards.

Non of the models have any conversions, they're all vanilla. I did make sure to used some funky colors and camo schemes to make the models stand out, using lots of colored washes from Army Painter. 

Strike Team Alfa - the first team. 

Spotless
Specialization protocol: Sawbones

The team medic and support grenade type. 





Brick
Specialization protocol: Ronin

Ranged combat specialist, armed with a heavy weapon.




Gator
Specialization Protocol: Ronin

Ranged combat specialist armored with a shotgun. 





Conduit
Specialization protocol: Splicer

A combat hacker with attack software, crucial part of the team.